How to go to the TP-LINK router settings?

How to go to the TP-LINK router settings?

Instructions for the entry in the settings have already written almost for all popular routers. I even prepared the universal instructions for the entry in the control panel, but I somehow forgot about TP-LINK. Therefore, I decided to prepare an article on the entry in the settings on TP-LINK routers. Good and popular devices. I myself use the router of this company for many years.

The TP-LINK control panel is very simple. It is precisely harder than on other devices. This article is suitable for all models of TP-LINK routers (TL-WR841N, TL-WR741N, TL-WR940N, etc.). Since there is almost everything equally, for which I love TP-Link.

Appearance TP-LINK web interface

If you bought a router, and decided to configure it yourself, then you cannot do it without entering the settings, it is not difficult to customize these routers, you can not configure everything without any problems according to the instructions from our site (If you do not find, write in the comments) . Well, even if you confuse the master, in the process of using a router, you all exactly most likely have to change some settings. For example: change the password to Wi-Fi, remember the forgotten password in the settings of your TP-LINK, or update the firmware. And every time you call the masters, it is not convenient, and even expensive. Everything can be done in a couple of minutes yourself, and if something does not work, we will help!

Log in to TP-LINK: 192.168.1.1 or 192.168.0.1

We do this:

  • Connect to a Wi-Fi router. You can connect both by the Wi-Fi network and on the network cable. In TP-Link settings, you can even go to the tablet, or a smartphone, through the TP-Link Tether application (but you can also via a mobile device browser). But I advise you to use the computer (laptop).
  • Open any browser and proceed at 192.168.1.1, or 192.168.0.1. It all depends on the router model. The entry address in the settings is indicated from the bottom of the router.
  • A username and password request appears. Default - Admin and Admin. If you have already changed them, then specify your own.
  • All, you went to the TP-LINK router settings.

And now let's look at everything in more detail and with pictures.

Connect to the Wi-Fi router, or cable. Read more about how to connect to Wi-Fi, read here. If you have a new router, just from the store, the wireless network will have a standard name. Something like "TP-LINK_0919" .

Or take the network cable that comes with a router, and connect it to a computer, or a laptop to the network card. And on the router in the yellow LAN connector. Like this:

Connect to TP-LINK to enter the settings

Connected, Now run on your computer any browser. We need to know what the IP address can be logged in to the settings of our router. Usually, in TP-Link this address 192.168.1.1 , or 192.168.0.1 . Now they usually indicate the IP address, but a domain. As a rule, it is tplinklogin.net  (This address no longer works, wrote about it. here ), or tplinkwifi.net . At the same time, there is also access to the settings by the IP address.

Just look at the sticker below the device itself. There will be an IP address and standard login and password that we will also use it.

192.168.1.1, 192.168.0.1 - IP to enter the TP-LINK settings

Can be specified by hostite.

tplinklogin.net, tplinkwifi.net: host TP-LINK router

We recruit the address of your router in the browser, and go through it. A window should appear in which you want to specify the username and password. Everything is simple: Standard Password - Admin. , username too Admin. . If you changed this data, then specify your own. If you forgot them, you will most likely have to reset the router settings, so that you can again use standard data to enter the control panel.

TP-LINK router settings

The control panel opens.

TP-LINK control panel

Or such:

New page with TP-LINK router settings

That's all, we went to the settings of the router. If you have It does not work in the router settings , then see this article. In it, I wrote about solving the most popular problems that may arise.

Comment, ask, share tips! Good luck!

Since there is already a description of the actions to log in to the settings of most common routers, even the general instructions on the entry in the control panel, it makes sense not to go around by writing a separate briefing and for high-quality and in demand for TP-LINK devices.

Connect yourself

The weighty advantage of this company's devices is that the process of gaining access to the control panel causes no more difficulties than on other routers, and almost identical to any model of routers of this company (TL-WR841N, TL-WR741N, TL-WR940N, etc. .).

It is not to be surprised that after buying a router, it is required to log in to the settings panel. Thanks to the article from this website, it is unlikely that the ability to face the difficulties in setting up routers. After all, despite the use of the wizard's services at the initial configuration, when you start using the router, it will certainly be necessary to make changes to some of them: Password change on Wi-Fi, restoring forgotten password я, update firmware. Permanent appeal to the master's convenience will not add, and the family budget will not save. After all, everything can be coped with themselves, and in the event of difficulties, it is difficult to ask for help on the site.

We get access to the TP-LINK settings panel

To enter the settings, you must implement the following actions:

  • Connect to the Wi-Fi router. It is possible to make it either through a Wi-Fi network or using a network cable. Although it is possible to enter the system settings and through a smartphone, and from the tablet, it is still recommended to use a laptop or PC.
  • Using any web browser, depending on the type of router, go to one of the addresses: 192.168.1.1 , or 192.168.0.1 to enter the router . You can see it on the bottom of the device.
  • When a login and password request appears in both graphs, indicate " Admin. "Or your own information if you managed to change.
  • You entered the settings panel.

Detailed Description Connection to Device with Illustrations

We use Wi-Fi, with a connection scheme for connecting to it can be found here, or a cable for connecting to the router. Kohl soon your device is barely purchased, the name of the wireless network should be typical. Something like "TP-Link_0919".

Also for connecting to the router (in a yellow LAN-slot) and a laptop or PC, in a network adapter, you can use the cable included in the set with the router, as shown in the photo below:

Then you need to run the web browser to the PC at your discretion. In TP-Link there is not one version of the IP to log in to the settings system, in the case of TP-Link to enter the control panel, you must write http://tplinklogin.net with a bunch of login and password Admin | Admin (standard in old models are used addresses 192.168.1.1 or 192.168.0.1) . You can find it on the tag glued down to the wall of the device. This label displays IP information, template password and login. Knowledge of this information in the future will benefit.

Tplinkwifi.net - TP-LINK Routher's Personal Cabinet

Then you jump over the address entered in the web search engine. In the open window, you score typical login and password - " Admin. ". In case the template data has been changed, then you must enter the current one. If you need to use standardized password and username, for example, you cannot remember them, it is likely to reset the router settings.

Authorization. Admin

After making the steps described above, the control panel will appear.

Thus, entry into the system of the router settings is carried out. In cases where It does not work in the router settings It is worth resorting to the help of this article, which describes how to solve the most common difficulties in their occurrence.

Leave feedback, ask questions and advise! Good luck!

Blog author

Certified Computer Network Safety Specialist. Routing skills, creation of complex network coverage schemes, including seamless Wi-Fi.

TP-LINK is one of the leading manufacturers of network equipment. We will present detailed information, how to connect or reconfigure the TP-LINK router. The procedure for connecting the device, settings for wired and wireless network, password change and firmware updates are considered. The information obtained will allow you to easily configure the home network in the TP-Link routers.

What data are needed to connect the router

To change the parameters of the router directly, you will need two things: browser and password with login for access. The latest data can be found on the label attached to the device housing. As a rule, standard login and password is the English word Admin.

You will also need data for authorization to use the Internet, which you should have your provider. At the same time, they must be spelled out in the Service Treaty. You need to enter them in a router or a specialized program, if such is provided by the provider. Be sure to find out the connection type (PPPOE, L2TP, PPTP and others) for proper configuration. When using dynamic IP, you need to find out your IP address, subnet mask and similar data. If all these parameters are already on your hands, you can connect TP-LINK.

Procedure for connecting the device to the network, PC or laptop

The procedure does not cause great difficulties, while performing 5-10 minutes. You should alternately follow the steps of the following instructions:

  1. Find the best location for the device. The network cable and power must not be under the stretch or create a user of the problem when you press the buttons (WPS / Reset).
  2. If you have a Wi-Fi Router with removable antennas, screw them into place.
  3. Turn on the power supply into the outlet, and insert the end of the wire into the appropriate socket. Make sure the power indicator lights up.
  4. The Internet cable is inserted into the port called WAN or Internet. Often, it is highlighted by another color.
  5. Connect the Machine Cable of the LAN-inputs of the router and the computer / laptop network card.

Models with Wi-Fi can be configured by the air. This is relevant if you do not have the ability to connect a router to a computer via LAN. On this manipulation with the wires completed. Next, the process continues in the web interface.

Login to the web interface

Manipulations with a modem are performed only in the web interface. You can get into it from a computer when a network cable connected or via Wi-Fi on a wireless model. Attention! You can use the interface at any time, even with a non-working Internet. Follow the instructions in the following instructions to login:

  1. Open any browser on your computer (Firefox, Google Chrome, Internet Explorer and so on). Enter 192.168.0.1 in the address bar (if it does not work, use 192.168.1.1). This IP is the "native address" of the router.
  2. You will transfer to the authorization page. In the fields, enter a login and password.
  3. If the data is entered correctly, you will fall on the start page. From here you can go to the main menu sections.

Routher settings

Go to the most interesting - changing the parameters of the router. In the main window there are more than 10 different sections. Most of them are not needed by the usual yowser. The activation of the Internet takes place at a maximum of two sections. Next, we will describe in detail how to configure the TP-Link router, about creating a wired connection, configuring Wi-Fi, changing the password of the input and other beneficial things.

Connect to wired network

The router has a quick setup function. Newbies recommended to use this section. Click the Next button and follow the installer prompts:

  1. In the country's input and supplier window, check the boxes under the fields and click the Next button.
  2. Specify the type of your connection. Here will differ further input fields depending on the selected item. This section provides an example of setting up static IP.
  3. Fill in the appropriate fields (IP address, DNS, and so on), after receiving them from a service representative.
  4. If the provider does not have a binding on the MAC address, select the "no, ..." string.
  5. In the next window, a wireless network is configured. We'll talk about it in more detail later.
  6. Click the Finish button, and then check the Internet operation.

When configuring other types of connections, fields will appear to enter a login and password. You need to enter the data that the provider will give. Change parameters The user can in the "Network" section. In some models "TP LINK" near the selection of the connection type there is a "Determine" button, which will help you know your type. Based on WAN, the corresponding characteristics are already configured.

For example, to use PPPOE in the window already appear fields for the login / password and parameters associated with PPPoE.

Connecting through a wireless network

For devices with a Wi-Fi module, you will also have to configure the wireless connection. You can do this when quickly configured (the penultimate item involves the introduction of all important parameters).

Let's figure out which Wi-Fi settings at the TP-LINK router should be changed. Broadcasting should be set to the "Included" state. SSID or network name is what will be displayed on other devices when searching. Specify your region, mixed mode. Canal and your width leave automatically. Advanced users can choose it independently taking into account busy channels with neighboring routers. If you want to put a password with an access point, select the WPA2-PSK protection type. Finally, it remains to enter only the password from the wireless network point. Click the "Next" button and complete the process.

Similar settings are in the "Wireless Mode" section. To change SSIDs or channel parameters, select the "Wireless Settings" subparagraph. You can change the password in the "Wireless Protection" item. With any changes, do not forget to press the Save button. If the selected parameters are not changed, restart the device.

Through these menu items, the TP-LINK manufacturer routers are configured.

Changing the password to enter the web interface

All owners are encouraged to change the standard password and login from the router. This is due to the fact that an attacker in the absence of a password to Wi-Fi or hacking will be able to enter the parameters of the modem and "to have fun". To eliminate the created problems will not be difficult, but it is better to avoid anything. The interface allows you to quickly and conveniently change the input data:

  1. Open the main modem menu through the browser;
  2. Select the System Tools section, Password subsection;
  3. Write down the old and new passwords;
  4. Click "Save".

If you have forgotten the entry data, reset to the factory settings.

Advanced settings

The router has a lot of additional functions that expand its capabilities. Consider some of the advanced settings:

  • Guest network. Allows you to configure a public guest network, limit the incoming / outgoing traffic or work hours.
  • Change addressing. It allows you to specify static IP addresses or use DHCP.
  • Forwarding - setting up virtual addresses, web telephony, conferences and the like.
  • Parental control functions. Restricting Internet access or specific resources.
  • Task manually routing tables (for specialists).
  • Binding MAC addresses to specific IP.

Learn more, how to configure the specific functions of the TP-LINK router, you can in the instruction manual.

VPN.

This technology allows you to hide information from prying eyes. Encryption is performed, thanks to which even provider will not be able to track your visits. However, only those models on which the VPN server is pre-installed can be used. You can perform the setup in the following steps (for English firmware):

  1. Go to the PPTP VPN Server section, Next Server Settings. Check the PPTP Server and MPPE Encryption (next to the Enable row). Specify the range of IP addresses.
  2. Go to Account Settings, and then add a new account via the Add New button. Enter authorization data.
  3. Save the settings. Restart the device. Next, in the "Network Management Center" on Windows, create a VPN connection.
  4. In the properties of the created VPN, select the desired tunnel protocol, as well as the type of encryption (as indicated in the image).

Now you know how to configure the router to work on VPN.

Filtering MAC addresses

The MAC address filtering feature allows the owner to monitor wireless stations that use the wireless connection (WiFay) through the MAC address registration. It is unique for any gadget. Adding filtering recording MAC addresses is carried out through the "Add ..." button:

  1. Enter the MAC address in the field of the same name. The format of the MAC address is as follows: VV-VV-VV-VV-VV-VV, where, instead of V, any number in a 16-tiric number system can stand. For example, 0D-0C-FF-B0-70-56.
  2. Enter a description of the stubble station.
  3. In the state drop-down list, select "Enabled" or "Disabled" for a specific entry.
  4. Click "Save".

Update firmware

If there are problems, it is recommended to use reset settings. But only a new firmware can perform troubleshooting at the microcode level. The installation file can be downloaded on the manufacturer's official website. Next, do a few simple steps:

  1. Go to the System Settings section, and then click on the "Update software" item;
  2. In the File field, select or specify the path to the previously downloaded firmware;
  3. Click "Update";
  4. The installation will take from 1 to 5 minutes;
  5. After the update procedure is completed, an automatic reboot will occur.

Now you know how to configure the TP-LINK router and update its built-in software.

How to go to the TP-LINK router settings

Setting up any router is performed through a special web interface to configure the Internet. About how the TP-LINK router settings menu is running and will be discussed in the article.

TP-Link is a popular router manufacturer, which has a large variety of models on its account, allowing to provide high-speed and stable Internet connection.

How to enter the TP-LINK router settings menu?

The entry in the TP-LINK router settings menu is performed in the same way as the router is absolutely any manufacturer. To do this, you need to run any browser (but better if it is standard Internet Explorer), and then you will need to go to the address 192.168.1.1 or 192.168.0.1 (If it did not work out at one address, insert another one in the address bar).

How to go to the TP-LINK router settings

The authorization window is displayed on the screen to enter the router settings menu. If you configure the router for the first time, then, most likely, you are set up standard data - the word Admin is in the role of login and password (actually similar authorizations can be used from other manufacturers). To make sure that just in case look at the bottom of your router - it should have a sticker that contains not only information about the router model, but also data for authorization in the web interface.

How to go to the TP-LINK router settings

Actually, if the data was entered correctly, you will see the next step on the menu screen of your router, through which the Internet is configured. And if in terms of entering the web interface, almost all routers are the same, then when setting it is necessary to specify unique data prescribed in your contract concluded with the provider.

If you have any questions related to the input in the TP-LINK router settings menu, specify them in the comments.

Did you like the article? To share with friends:

Login to Personal Cabinet TP-LINK

For TP-Link routers settings, there is a special web-interface in which you can enter through the address bar of the browser. No access to the Internet is not needed. It is only necessary to connect the Ethernet cable of the PC and the router (or connect them to Wi-Fi if the access point is configured) and use IPI 192.168.0.1 - Login to the TP-LINK router.

Content:

  1. TP-LINK: Entrance to Personal Cabinet
  2. How to go with a smartphone?
  3. TP-LINK ID or remote access to the router settings
  4. Management TP-Link ID with smartphone
  5. Possible errors at entering
  6. Conclusion

TP-LINK: Entrance to Personal Cabinet

To access the router system (router), an IP address of 192.168.0.1 is used. If the physical connection of the two devices was not carried out, it must be done in the first place.

It can be different from this if the router was shown a local IP address.

Instructions input to the Personal Cabinet page TP-LINK:

  1. Open any browser (for example Google Chrome) and insert or write to the search string 192.168.0.1

  2. Choose a transition to a regular address, but not to search for Google.
  3. In the "Username" field, enter Admin. , for the "Password" field - too Admin. . Click "Login".

  4. Finish, you are on the main page of the router panel, where all information about it is collected and you can configure it.

This authorization method works for all TP-Link routers models, N (TL) and AC Series (Archer). More, Archer routers use the address tplinkwifi.net to enter the admin panel. Therefore, you can choose which of the addresses to enter, there is no difference.

How to go with a smartphone?

To access the router panel, you need to connect to it on a Wi-Fi network that one distributes. If the distribution is turned off in the router parameters, you need to turn on Wi-Fi. Further:

  1. Open the Wi-Fi section on the phone and connect to the network access point by entering the login (network name, SSID) and password.

  2. Run the browser and write aipi to the address bar 192.168.0.1

  3. Enter login and password - Admin. In the first and second field (by default, but it can be changed).

  4. Ready. Access is provided.

TP-LINK ID or remote access to the router settings

TP-LINK ID is a cloud service of the company that allows you to manage the network device remotely via the global network, without the need to connect directly from the local network of the router. The cloud service is available only for AC Series devices (Archer).

TP-LINK ID registration is done like this:

  1. Through the online browser string, open the URL http://tplinkwifi.net and in the web interface, login on the login and password Admin.

  2. Follow the navigation to the "Basic Setup" section → "TP-LINK cloud" and click the "Register Now" button.

  3. Next, enter the email to which the cloud profile is attached, and the password.

  4. Confirm the registration by clicking on the Identifier link in the letter, which is directed to the specified mail.
  5. Ready. Now in the "TP-LINK cloud" section, enter the new data for the input to manage the router remotely.

Important remark! After binding the ID, the input to the router settings will be possible only through TP-Link ID. Through the local administrator of the device for login and password Admin log in to the system anymore.

Management TP-Link ID with smartphone

For convenient remote control, the developers created the TP-Link Tether application. Through it you can:

  • see the models that support TP-LINK cloud service;

  • control the TP-LINK ID account and tied to network devices;

  • Register a new device in the cloud.

The application is localized into Russian, so there will be no problems with adding and settings in terms of "misunderstanding".

Possible errors at entering

The most common input errors will indicate in this block.

Long page loading or inscription "Can't get access to the site."

Take care of the fault in the following:

  1. Incorrect IP address of the router (most common).
  2. PC with a router is not connected by patch cord.
  3. Patch Cord Connectors are poorly sitting in the connectors.
  4. The network cable itself (interrupts) is defective.
  5. The router is turned off or faulty.
  6. Drivers are not installed on the computer's network card.

Start from the first (which is most likely the reason):

  • Combination of keys Win + R. Open the string and activate cmd.

  • In the command prompt, execute the command ipconfig
  • "Main gate "Spends the present address of the router with which the laptop or PC is connected.

Perhaps your router provided by the provider was changed to them, or by 192.168.1.1, or any other. If the Aypishnik has not decided, look for a problem in the following items mentioned.

Incorrectly specified login or password.

There are two reasons:

  1. You misinterpret Login and Password due to problems with the keyboard layout.
  2. He was changed.

If you did not tie a TP-Link ID (Authorization of the local administrator), cannot be logged in via Admin, and do not remember the modified login and password, reset the settings.

On the router housing, hold the RESET (RST) button for 7-10 seconds. You reset the router to the factory status (understand the start of the process on the changed display), thereby returning it the standard Local Administrator input data (Admin, Admin). Unfortunately, all other data will fly too and will have to configure them again.

If you tied a TP-LINK ID (Authorization of the remote administrator), make a password via the "Forgot Password" form. If you lose access to e-mail, you will have to roll back the router to the factory settings via the RESET button to return access to the personal account.

Sometimes, the RESET button is drowning into the housing, so it is necessary to press it with a toothpick, a needle or clip.

Conclusion

The entrance to the TP-LINK router panel is simply performed according to the standard data if the login and password did not change before that. Otherwise, you need to use new data, and when you are lost, reset the TP-LINK router settings to the factory.

Today we will tell you how to go to the TP-LINK router settings. To enter the control panel of the modern router or the TP-Link modem, you can use any device, whether it is a computer, a smartphone or a tablet on which a regular browser is installed. The official settings website is optimized both under a large screen and mobile gadgets.

Official site to enter the TP-LINK settings through the browser

To enter the TP-LINK router settings, several different official "sites" - tplinkwifi.net, tplinklogin.net, 192.168.0.1 and 192.168.1.1 were used. How to understand what of what of these addresses is the control panel of your marchutizer?

Everything is simple. It is enough to flip your router upside down and look at the sticker placed on the housing.

TP-LINK Archer C1200 Router

Depending on the model, the following data will be indicated here:

  • Official site control panel
  • Login and password for logging in settings (Admin, Password)
  • TP-LINK WiFi Network Name
  • Password for connecting

TPLINK WR820N input

How to enter the TP-LINK router settings panel?

Now in order to enter the TP-LINK settings panel, you must first connect to the router from the computer, laptop or phone. To do this, turn on the WiFi adapter on your PC and looking for a network called "TP-Link_xxx"

Connecting to WiFi Router TP-LINK TL-WR820N

It will be either password protected at all, or it will be necessary to use the key that is written on the label. You can also connect the router to the computer over the cable through the LAN connector. In this case, to log in to the TP-LINK router settings, we do not need a wireless signal.

RESET WPS TP LINK

Voted: 2213.

In another connector, marked as "WAN" sticking a cable from the provider, along which you used to receive the Internet directly to the computer.

Connecting TP LINK WR820N by cable

Please note that the Windows icon string will display the status "without Internet access". Because, we have not yet specified the parameters for connecting to the provider, it should be. No Internet is required to enter the TP-Link settings.

Authorization in the TP-LINK router - admin-admin

After that, you need to run on a computer any browser - Internet Explorer, Microsoft Edge, Opera, Google Chrome, Mozilla Firefox, Yandex, Safari or another. And enter the official website in the address bar, which is specified on the same sticker.

Tplinkwifi net.

In the new TP-LINK models, it looks like "tplinkwifi.net" or "192.168.0.1". Also used addresses "tplinklogin.net" or "192.168.1.1".

We fall on the entrance page in the router. Here you need to specify the username and password. Most often, by default, TP-Link, they have the "Admin-Admin" value - the data are currently available for your modification on the information label.

Personal Cabinet TP Link

However, in new models it happens that login and password are set when you first configure the user. Therefore, if the default data is not suitable, then they have already been changed earlier by you or another user. In this case, you need to know them from the local network administrator or complete the TP-LINK router reset to return the original parameters or set your own authorization key in the control panel.

In order to go to the settings of the router from the phone, it is more convenient to use TP-Link Tether's branded mobile application. We tell about working with him separately.

Video, how to enter the settings of the TP LINK router

Prices on the Internet

Alexander

Alexander

An experienced user WiFi networks, computer equipment, video surveillance systems, wireless gadgets and other electronics. Graduate educational center with MSTU them. Bauman in Moscow. The author of the video course "All Secrets Wi-Fi"

Ask a Question

Добавить комментарий