How to enable or switch video card in bios?

Users can sometimes encounter such a situation when it becomes an urgent question about how to switch the video card or video panel in the BIOS. A similar problem may occur not only because your video card does not work. The thing is that modern computers may not have one video card, as their predecessors, and at once two are integrated and external. However, only one of them can work at one point in time, and therefore it is often the need to change the way to display video information on the monitor in such a way that it is carried out on another video card. To do this, it is necessary to turn one of the video cards, and the other, respectively, disable.

Enabling video cards in BIOS

Turning on the video card in the case of a desktop computer

If you are the owner of a desktop computer, then you may have two video cards: one - integrated into the motherboard, and the other is installed in the extension connector of the motherboard (sometimes such fees are discrete). If you use a built-in (integrated) video card, and then purchased discrete, then you may encounter the following problem - how to turn off the video card in the BIOS and change the way the image output method so that it is carried out a more powerful discrete card.

In most cases, serious problems in the question of how to switch the video card in the BIOS does not occur - the monitor will work with that video card to which it is connected to the connector. However, such switching in automatic mode is not always possible. In some BIOS, the user must independently install the desired video card, and unnecessary disable. Often, the BIOS options can be used to solve this problem.

Therefore, it is worth a little more about how to turn on the video card in the BIOS. Usually this procedure is easy. BIOS or UEFI options intended for switching on a video selerator can wear different names. For example, it can be the Primary Display options or Init Display First option in the section on setting up the motherboard equipment. Possible values ​​of the options may be Options onboard, PCI, AGP or PCI-E (depending on which tires are used on your motherboard). Selecting an option PCI-E option, for example, will enable the external PCI-Express video card, and the built-in is to disable.

Enabling the video card in the case of a laptop

Many modern laptops, like desktop computers, are equipped with two video cards - built-in and discrete. The built-in laptop video card is usually located in the chipset or even in the processor itself. This video card usually has low power consumption, but also, at the same time, it does not boast of high performance. Therefore, very often laptops are equipped with a second, discrete video card. Such a video card is much more suitable for applications that make high chart requirements, such as computer games.

It is easy to understand that due to the features of the design of the laptop, in which the monitor is built into the case, the selection of the necessary video card cannot be carried out in the same way as in the desktop computer switching the cable. Therefore, the user must usually produce this operation. There are, however, the laptop models that are able to automatically switch the video cards depending on the download and the applications used by the operating system, for example, turn on the discrete video card in case of starting the game and turn it off at the time of launching a regular office application. But if there is no such possibility in your laptop, then it is often in order to use a discrete video card, the user does not remain anything other, as in the BIOS, turn off the built-in video card.

So, How to turn off the video card in the laptop bios? First of all, it is worth noting that it is not always necessary to shut down or turn on the video card to be climbed into the BIOS. The fact is that special software utilities are often used to switch the video card on laptops. If the laptop has an AMD chipset and the ATI / AMD discrete card, the switching can be performed using the Catalyst Control Center program. To select a video card in laptops with an Intel processor and a discrete NVIDIA video card, you must use the NVIDIA Control Panel.

If you use a laptop with an Intel processor and an ATI / AMD discrete card, then to automatically switch the video card during operation, you will need to select the Switchable option in the Display Mode option in the BIOS. The BIOS Display Mode option will be indispensable and if you are working in the Windows XP operating system, and not in Vista, Windows 7 or 8, because in XP software management methods of video selerators, as a rule, do not work. To enable the Discrete Laptop Video Card with Windows XP, set the Discrete option.

Conclusion

Turning on, turning off or switching the video card in the desktop is usually automatically implemented. In the same cases, when the video card switching cannot be implemented automatically, as well as in the case of using laptops, the user must use software or BIOS options. We hope that this article helped you understand how to turn on the video card in the BIOS.

Recommend to friends Article:

How on a computer in the BIOS enable the built-in video card

Almost all modern motherboards are manufactured with an integrated graphics adapter from Intel or AMD. This is a cheaper analogue of the discrete video card. It is usually built into the central processor or the north bridge. Integrated graphics has relatively weak performance indicators, compared with discrete solutions, but is ideal for surfing on the Internet and work with simple programs.

To enable integrated graphics, you will need:

  • Screwdriver Set;
  • AMD Catalyst system utility;
  • NVIDIA CONROL PANEL system utility.

Setting the parameters in the BIOS menu

Step 1

Enable or restart (depending on the current status) your PC. When the POST logo appears or the initialization procedure appears, press the "DEL" or "F2" button, depending on the PC model. After activation, you will enter the BIOS menu of your system board.

Step 2.

In BIOS, find and open the graphics settings menu. It is usually located in the Advanced menu, "Chipset Features" or "Graphic Configuration".

How on a computer in the BIOS enable the built-in video card

Depending on the BIOS manufacturer, the names may differ: "Onboard Graphic", "PCI", "AGP" or "PCI-E" (depending on the tire type used on your motherboard). Select "PCI-E", for example, activates the discrete video card, and the built-in will turn off.

How on a computer in the BIOS enable the built-in video card

In the UEFI BIOS, the graphics settings are indicated as "primary display" or "init Display First" in the section, configuring the motherboard.

How on a computer in the BIOS enable the built-in video cardStep 3.

After you have found the necessary settings, configure the graphics parameters based on the following properties. Install the bus that is associated with the necessary graphics: PEG (PCI Express 16x), IGPU (integrated graphics), PCI or AGP. Also, the required item may be called "Primary Graphic Adapter" or simply "Graphic Adapter".

Step 4.

After setting up the required parameters, press the "F10" key or go to the "EXIT" menu and select "Save and Exit". After that, the computer will reboot and changes will take effect.

Hardware solution problem

Step 1

Disconnect the computer and then de-energize it by removing the power cord from the outlet. Disconnect the cable from the video card and plug it into a similar port, built directly in the motherboard. This is a port of an integrated adapter.

How on a computer in the BIOS enable the built-in video cardNote: If you do not have this port, most likely, there are no built-in graphics in your PC.

If the above method did not help, do the following:

  1. De-in the system unit and remove all connected devices from the ports.
  2. Remove the side compartment cover of the system unit, twisting 2 screws on the rear panel.
  3. Carefully remove the video card. To do this, unscrew the screw that crept E to the case, and then move the lever, locking the map in the PCI slot and pull it on yourself.
  4. Close the system unit. Turn on the computer.

After that, you must automatically turn on the integrated graphics adapter. If this did not happen, then your PC does not support embedded graphics.

Setting the switching of graphics using OS (for laptops)

Unfortunately, the described methods are not suitable for switching the video card in your mobile computer. Switching graphic devices in laptops is carried out by installing special software - driver. Switching is possible only in those laptops that installed exactly 2 video cards. The most common combinations are "Intel - ATI", "Intel - Nvidia", ATI Integrated - ATI Discrete.

To switch to the built-in graphics, you must open the NVIDIA or AMD discrete video card driver.

For ATI AMD: Run "Catalyst Control Center", go to the power settings and select "GPU Energy Saving Mode.

How on a computer in the BIOS enable the built-in video card

For NVIDIA: Run the NVIDIA control panel, go to the 3D parameters menu and select the chip to perform 3D processing.

How on a computer in the BIOS enable the built-in video card
Turn on the video card in BIOS

Modern PCs are often equipped with discrete video cards. Such devices do not require additional settings, except for installing / updating drivers on the working OS. More budget PCs have built-in video adapters. They are inferior to external video cards not only in performance, but also in functionality.

Often the built-in video card functional is not enough for full-fledged work with graphic editors, launching games, etc. Such a PC can always be contapgraded by adding the configuration by a discrete video adapter. In this case, it may be needed to enable and configure it. This is especially true for system boards that are not capable of switching automatically between discrete and built-in cards. I propose to familiarize yourself with the detailed instructions for including the video card in the BIOS.

Turn on the discrete video adapter

  1. To enable a card from under the BIOS, you will need to log in to the BIOS menu by pressing the Delete button. To get into the menu, click the key in a couple of seconds after the PC is turned on. Other keys, such as F2 or F12, can be used on different system boards. What exactly - can be viewed in the manual for the motherboard. The main thing is not to skip the moment and press the desired key on time. Otherwise, the OS load will begin, and you will have to restart the PC to try logging into Bios again.
  2. Once in the BIOS menu, looking for a section with a selection of a video card used. As a rule, these settings can be found in the Chipset section. In some BIOS interfaces, the priority of the video cards used is located in the Advanced menu. Having found in the desired section, go to the line of the First Display Boot or Boot Graphics Adapter Priority.
  3. Select this parameter and click ENTER. The menu with the choice of available parameters will appear before us. If there is a connected discrete video card, the PCI item is available or PCI Express. It is necessary that it is necessary to choose that the PC use the device connected to the PCI bus. Go to Exit and select the Save / EXIT option. It is important to get out of BIOS precisely with preservation. Otherwise, the changed settings will not be applied. After that, the PC will restart and repeatedly will use a discrete video adapter.
Choose a PCI port as the main video device
Choose a PCI port as the main video device

4. It happens that after changing and saving settings in the BIOS, the external video card is still not used. Here are two options - the video adapter is faulty or is not tightly inserted into the PCI port on the board. To start checking the connection - it is necessary that the map is tightly in the port. If this is all in order, most likely, the device itself is faulty.

5. There is an option for connecting an external video card outside the BIOS. This will require you to install a program that emulates your PC BIOS. Such software allows you to perform the BIOS settings directly from under the installed OS. It is suitable for those who failed to figure out how to get into the BIOS menu at the start of the PC. The utility is distributed free of charge, weigh no more than 20 MB and quite easy to use.

If everything is in order with an external video card, it can be turned on without problems on computers that do not support automatic switching between the built-in and discrete iron options.

Material author: Angelina Snezhina

Subscribe to our channel And put the husky! And you can visit our official site .

Many people acquiring a computer are not always ready to part with a serious amount of money. Fortunately, such a technique is very easily exposed to upgrade, so some initially take a PC with a built-in video board, and over time - additionally acquire a separate, more powerful one. And at this moment the question may arise - how to include a video card in the BIOS?

Naturally, initially it is worth dealing with that, and why, in fact, it may be necessary.

In what cases such a switch is necessary

The reason for the occurrence of such a desire is quite easily explained - the computer, in most cases, "does not understand" that the user integrates new equipment into the system and it is necessary to switch to it.

Therefore, it is necessary to do it yourself. It is at this point that the question arises how through the BIOS to include a video card.

Instructions for solving this problem

It is clear that some users try independently not to change any settings for their equipment. But if you use the following instruction, then understand how to enable an external or integrated video card in the BIOS will not be particular problems. So, proceed:

  • Initially, it will be necessary to initiate the procedure for restarting computer equipment.
  • Immediately after the start of the new cycle, it will be necessary to hold the "Del" button (in some embodiments the other keys are used).
  • If everything is done correctly, the computer will switch to the BIOS settings window.
  • Not always the BIOS shell is Russian-speaking. Nevertheless, it is possible to figure out so.
  • We need a partition where there are tools associated with the work of graphics cards. Most often, they can be detected in the "Chipset" menu or in something similar.
  • Another screen is activated. It should choose the option where it comes to exactly the video bill. It may be "Boot Graphic Adapter Priority" or "First Display Boot". That is, to search for specialized words: Graphicadapter, Display.
  • On one of these names, after their detection, you will need to click using the All-familiar Enter key.
  • This will allow access to the selection of available options. How to enable a discrete video card in bios? Select option - PCI Express. Or - click on its name in some versions of the BIOS

That's not all. Some make one common mistake - they forget that before the next restarting must be preserved made changes. You can select the desired option in the "EXIT" menu.

Why does not switch?

It would seem that the user did everything right - exactly according to the instructions. The reboot of the company begins, but the graphics board does not display the image on the monitor screen. Why is this happening? There may be several options:

  • The user did everything right, the board also installed, as it should, but tritely forgot to rearrange the cable connecting it with the monitor.
  • The owner of the PC forgot to fulfill the mandatory preservation of changes made above the above method.
  • The graphic board itself, which the user wants to go, is faulty.
  • The installation of the product in the motherboard was not completely qualitative, perhaps the contact between them is simply absent.

Do not forget that most modern models of such equipment require additional nutrition - there is a place on their package where the wiring from BP should be connected. The power of the power supply itself must also be appropriate.

How to return to the integrated version

Indeed, sometimes there is an inverse desire, and with him the question - how to include the built-in video card in the BIOS? There is nothing easier! It should be acting, according to the described instructions, but when choosing one of the options, dwell on the other. For example, it can be denoted as "onboardgraphic", "IgPU" or something similar. Naturally, it is worth not to forget about saving settings and that the cable from the monitor will need to be rearranged into the desired connector.

As a rule, the question of how to enable the video card in the BIOS, most often set the owners of laptops, which provide for the installation of two independent graphics accelerators - integrated and discrete. The operating system itself does not always understand the user's desires and switch in operation from one adapter to another. Moreover! Sometimes in the operating system to use two cards simultaneously with the help of regular means it is impossible. Therefore, it will have to solve the problem of how on a laptop, turn on the video card in the BIOS. It's easy enough to make it, but do not forget about some of the features of the Windows OS itself. Actually, all these questions are further offered to consideration. The technique is quite simple, but you should pay attention to some small nuances.

How to turn on the video card in bios and why is it necessary?

To begin with, we will focus on the question associated with why all this is necessary. We still leave the problem while the problem of how to enable an integrated video card or its analogue in the form of a discrete accelerator, and let's see what benefit from this can be learned.

how to turn on the video card in bios

If someone does not know, integrated chips, unlike discrete, consume significantly less energy in work. And for a person who constantly carries a laptop with him and uses them without a power connection, it is just what you need. After all, in fact, thus, a significant savings of the battery is achieved, which in some situations can act as a key factor.

Another point is associated with the easiest situation when at one time the most common office funds are used, and another - games or resource-intensive multimedia programs. It is clear that for any editor, such as Word or Excel, the maximum of the possibilities of the graphic chip is absolutely not needed. There is a fairly ordinary integrated adapter. But during the leisure hours, when the user decided, for example, to go through the next level of the new game, without a discrete card could not do. And the system does not always perceive both graphic chip. Rather, she sees them, but only one uses, setting it by default. It is here that knowledge will come in handy about how in the BIOS to include a discrete video card, if the integrated (or vice versa) is currently installed.

Basic BIOS settings

Now directly about the problem itself and its solution. How to enable the built-in video card in the BIOS, if the default system preferences the discrete accelerator? Everything is extremely simple.

How to enable the built-in video card in bios

We go into the settings of the primary system, using one key or a combination of several (for different models of laptops or stationary PCs, they may differ significantly), after which we go to the Advanced Settings section. Usually it is called Advanced. Here you need to select the menu of the current chipset parameters (ChipSet), and then find the Boot Graphic Adapter Priority string, First Display Boot or something in this spirit. If the PCI Express parameter is set in the settings, which corresponds to the use of the discrete video card connected directly to the PCI bus, the parameter must be changed to another (for example, IGPU or Internal). After that, it is enough to save changes when exiting (F10 + Y) and restart the system.

Enable graphics adapter without entering BIOS

Recently, a fairly interesting opportunity has emerged, which makes it possible to solve the problem of how to enable the video card in the BIOS, without the immediate entry into the primary system.

how to turn on the video card through bios

To do this, you just need to download the so-called BIOS emulator - a program that runs directly in the Windows operating system environment in the DOS mode of the command console and allows you to set up anything different from the actions produced in the most primary system. The names of the partitions, however, may differ somewhat, but the video card is the same algorithm.

How to turn on the video card through the BIOS in case of installing the second accelerator or simultaneous use?

Another situation that is quite strongly worried about all users is related to the determination of the possibility of working the second accelerator, let's say when buying, a discrete card in addition to the existing integrated.

How to enable a video card in the BIOS on a laptop

In this case, the question of how to enable the video card in the BIOS is solved and using the above parameters above, and with the installation of automatic automatic use (AUTO parameter), the cooler specifies a specific sequence of switching from one adapter to another. However, mostly, this concerns the choice of a preferred chip when loading the system. Therefore, others will also have to use other settings.

What do you need to work two accelerators?

It goes without saying that the system must contain correctly installed drivers for both devices. With integrated chips, as a rule, there are no problems because Windows systems their control components are installed automatically.

How to enable an integrated video card in bios

But for discrete cards alone drivers will be little. Here it will be necessary to establish the associated software.

Automatic switching between adapters

Consider the situation on the example of the Radeon Randeon Video Explorers. We will need a small utility called AMD Engine / Catalystcontrol Center.

As in the BIOS, turn on the discrete video card

After installing and running (naturally, on behalf of the administrator), you must select the AMD PowerXpress setting item. What is most interesting: the program will automatically determine not only the discrete graphic chip associated with it, but also the built-in card with a mark of which the device is currently involved at the moment. To select the second accelerator, you just need to highlight it and press the use button. To automatically switch between adapters - use the automatic power selection point of the GPU when operating from the battery (batteries).

Exactly the same situation is observed with NVIDIA video cards, for which their own utilities have been developed. In addition, you can additionally use various kinds of "native" programs to configure the performance of chips, testing and acceleration by the software method or adapt to computer games, which will ultimately give a more tangible result in terms of the performance of the chip itself and graphics processor performance.

Instead of pre-school

If you bring a certain conditional result by solving the problem of how to enable a video card in the BIOS, it is not difficult to conclude that the case of the primary input / output system can not be limited to the settings of the primary I / O system. If you really want to use both adapters and all of their possibilities, what is called, on all one hundred, and even with automatic switching between them, depending on the mode of operation of the laptop, without comprehensive measures can not do in any way. For stationary terminals, the use of accelerators is purely nominal, since the mode of operation from independent sources in them, as a rule, does not apply (except when the power is turned off when the power is carried out at the expense of the uninterruptible power supply).

Author LikeProst!

How to turn on the video card in the BIOS

If you have a motherboard with an integrated video card, but you decided to install a discrete, then after performing this procedure it may also be turned on. This is due to the fact that it is not always and not on any model of the motherboard switching between the built-in and discrete cards is automatically.

How to turn on the video card in the BIOS

You will need

  • - Computer with Windows.

Instruction

Enable

Video card

You can in the BIOS menu. To enter the BIOS menu, you need to press DEL immediately after turning on the computer. Sometimes other keys can be used for this. Find out which one is used on your system board, you can from the instructions for it. If you do not have time to press the desired key on the original screen on the computer, then you will again have to reboot it.

After you get into the BIOS, find a section in which you can select which video card to use. Usually the board selection option is in the ChipSet section. In this section, find the Boot Graphic Adapter Priority string (on some motherboards, the video card selection option is called First Display Boot)

Select this string and press the ENTER key. After that, options for choosing, among which should be PCI Express or simply PCI. Select this option. This means that the computer will use the video card that is connected to the PCI Express bus. Now the device is enabled. In the BIOS, select EXIT, then Save / Exit. The computer will reboot. When it starts, the system will use a discrete video card.

If you activated the use of a video card connected to the PCI Express port, but after exiting BIOS and save the settings, it is still not used, then there can be only two reasons. Or a discrete video collection is faulty or, more likely, you did not fully connect it to the PCI Express port. Check the connection. The card must be well fixed.

Also include the video card can be without logging in BIOS. This method is suitable for those who could not find the input key in the BIOS on the motherboard. You need to download the BIOS emulator, which can be run from the desktop. The work of the emulator is no different from work in the BIOS itself. This utility is completely free and weighs only 20 megabytes.

Similar advice

  • How to enable video adapter How to enable video adapter
  • How to switch between video cards How to switch between video cards
  • How to switch the video card in bios How to switch the video card in bios
  • How to change the video card in the BIOS How to change the video card in the BIOS
  • How to configure a video card in BIOS How to configure a video card in BIOS
  • How to connect the built-in video card How to connect the built-in video card
  • How to disable the built-in video card in BIOS How to disable the built-in video card in BIOS
  • How to enable an integrated video card How to enable an integrated video card
  • How to turn on the second video card How to turn on the second video card
  • How to turn on the video card How to turn on the video card
  • How to switch the video card on the laptop How to switch the video card on the laptop
  • How to turn on two video cards How to turn on two video cards
  • How to enable a computer without a video card How to enable a computer without a video card
  • How to disable the built-in video card How to disable the built-in video card
  • How to turn off the integrated video card How to turn off the integrated video card
  • How to switch to the built-in video card How to switch to the built-in video card
  • How to overclock a video card in BIOS How to overclock a video card in BIOS
  • How to find out why the computer does not see the video card How to find out why the computer does not see the video card
  • What needs to be done if the laptop video adapter refused What needs to be done if the laptop video adapter refused

Turn on the video card in the BIOS or via the Windows interface

Admin. 02/18/2020

Loading...

In a certain proportion of the laptops presented in the market there are two installed video cards: built-in and discrete. The first consumes less energy and is necessary for performing simple tasks. The second is more stronger than the battery, but provides the user More graphic performance. We will figure it out in detail how to enable the video card in the BIOS or through the Windows interface.

Enabling video card via BIOS

To turn on the integrated or external video card through the BIOS is Unusual for an ordinary user task. A visit to this section of the system is usually performed by experts or during Windows Reset. But it is not necessary to scare, if you precisely follow the instructions, then everything will turn out:

  • Make the enable or restart of the computer.
  • Restarting a computer
  • The manufacturer's logo and the inscription in which the manufacturer should be displayed on the first screen. The key used to enter the BIOS. In the prevailing majority of cases, this is "del". In order not to miss the moment, it can clamp immediately after turning on the PC And keep before the bios menu appears.
  • Find clause "GraphicsDevice" or PRIMARYGRAPHICSADAPTER - The exact name as the location depends on the BIOS version. The desired item can be located in the "Advanced" section, "Config", "Peripherals".
  • PrimaryGraphicsadapter.
  • Press ENTER to start editing the current value.
  • To turn on the integrated video card, select the item "INTERNAL" To enable discrete - "PCI", "PCI-E" or "Discrete Graphics".
  • Turning on the integrated video card
  • It remains to save the changes and exit the menu. The screen will be given a tip relative to the key that these two steps are performed. Usually you need to press F10.

On this The inclusion of a particular video card as the main graphics processor is made. After rebooting, the computer will use the component specified in the BIOS settings.

How to switch the video card on the laptop

For the AMD Radeon and NVIDIA graphics processor, there are special software that allows Switch directly to Windows. This option is convenient for its speed and simplicity: the user does not need to wade into the BIOS Debresions, the configuration you need at the moment is set to several clicks.

Instruction for AMD.

Loading ...

Loading ...

Together with the installation of the necessary drivers, on the computer also Installed Catalyst Control Center. It is necessary for a thinner setting of graphics processors used in the system. Usually, the combination of the built-in and discrete video card is Intel-ATI or ATI Integrated-ATI Discrete.

Using Catalyst Control Center, it will turn out to see the currently active GP, as well as make it switching. Instruction:

  • Run the program through the system tray or located in the menu "Start" label.
  • In the left side of the window to deploy a list "Food" , Select item "Switchable graphics adapters."
  • Catalyst Control Center.
  • Information about the current graphics processor will appear. Below you can choose High performance (corresponds to a discrete video card for a laptop) or Low power consumption (Built-in video card).

Instruction for nvidia

A program for managing GP from NVIDIA is characterized by the configuration principle - it is separately selected for which application, which video card will be used. After setting parameters, switching will be automatically carried out:

  • On the empty place of the desktop, click on the right mouse button.
  • In the context menu, select the item "NVIDIA control panel".
  • Control panel NVIDIA
  • Go to section "Manage 3D parameters".
  • On the right side of the window, select the tab "Software Settings".
  • The first item is responsible for choosing a program, the second - video card.
  • Save settings before going out.

Enabling video cards in device manager

Another alternative to using the BIOS is the device manager. The system utility will allow not only to turn on the desired video card, but also update the drivers.

Instruction:

  • Open Properties Label "My computer".
  • Left choose "Device Manager".
  • Device Manager
  • In the list presented to the string "Video adapter". If two video cards are installed on the laptop, then they will appear here.
  • Click right-click on the desired one in the context menu, select "Enable". Here is also updated or installing drivers.
Turn on the video card in the BIOS or via the Windows interface

note

If the action is performed on a stationary PC, then further will be required Switch monitor cord: With a built-in video card to external or vice versa. Before that, it is mandatory to turn off the power of the components.

These are all ways to include a built-in and discrete video card on a computer or laptop. BIOS is the main system that Controls the work of the components of the elements But at the same time there are much simpler techniques on and switching graphics processors: a program from the manufacturer or device manager.

logo Vitaly Malodsky

Добавить комментарий